重型机械Issue(5):23-30,8.
异形截面环件芯辊双工位轧制成形工艺数值模拟
Numerical simulation of the two-station mandrel rolling forming process for profiled-section rings
摘要
Abstract
Owing to their complex cross-sectional geometries,the rolling process of profiled rings is susceptible to the combined effects of nonuniform local metal flow,insufficient groove filling,and limited inner-hole assembly space,which reduces forming accuracy and process stability.To address the assembly space constraint for large-size target mandrels caused by the limited inner hole of the initial ring blank,a two-station rolling process based on a combined mandrel is proposed,and its forming mechanism is elucidated.A three-dimensional finite element model is established using Simufact Forming to investigate the forming behavior and the evolution of strain and temperature fields.The results indicate that the process enables stable rolling during the preforming stage,with relatively uniform strain and temperature distribution in the ring.In the second station for profiled cross-section forming,the equivalent plastic strain exhibits a surface-high and core-low distribution characteristic,with deformation mainly concentrated in the thin-walled groove region.The temperature field shows that the thin-walled groove region dissipates heat rapidly,resulting in a lower temperature,whereas the thick-walled core region dissipates heat slowly and maintains a higher temperature.Moreover,increasing the initial temperature in the second station effectively enhances the deformation uniformity of the cross-section.Industrial trials further confirm that the process enables stable forming of the target profiled ring,and the evolution laws revealed in this study provide a reference for optimizing the process parameters.关键词
异形环件轧制/双工位轧制/组合式芯辊/温度场/成形质量Key words
profiled ring rolling/two-station rolling/combined mandrel/temperature field/forming quality分类
矿业与冶金引用本文复制引用
赵增运,管永强,项宇诚,毛泱博,张雁玲,王建梅..异形截面环件芯辊双工位轧制成形工艺数值模拟[J].重型机械,2026,(5):23-30,8.基金项目
忻州市重点研发计划(20250107) (20250107)