| 注册
首页|期刊导航|重型机械|超声辅助铝/钛电阻点焊接头性能调控及预测

超声辅助铝/钛电阻点焊接头性能调控及预测

何默涵 魏连峰 郑勇 杨灿湘 商乔 陈显昊 王元勋

重型机械Issue(5):31-36,6.
✕
重型机械Issue(5):31-36,6.

超声辅助铝/钛电阻点焊接头性能调控及预测

Performance regulation and prediction of AA6061/Ti6Al4V dissimilar joint by ultrasonic assisted resistance spot welding

何默涵 1魏连峰 1郑勇 1杨灿湘 1商乔 1陈显昊 1王元勋2

作者信息

  • 1. 中国核动力研究设计院四所,四川 成都 610200
  • 2. 华中科技大学航空航天学院,湖北 武汉 430070
  • 折叠

摘要

Abstract

Composite structures of aluminum-titanium dissimilar alloys combine the advantages of light weight,high strength and cost-effectiveness,presenting promising application prospects in the lightweight design of large-scale structures.However,using the traditional resistance spot welding is likely to result in insufficient joining.Moreover,there is a lack of process parameters for the welding of Al/Ti alloys.Accordingly,achieving aluminum-titanium joints with reliable strength and controllable forming is urgent to be solved.In this study,a hybrid welding process combining ultrasonic vibration and resistance spot welding was adopted for lap welding of thin AA6061 and Ti6Al4V sheets.The effects of different ultrasonic loading modes on the tensile-shear properties of Al/Ti joints were analyzed,and a prediction model for the tensile-shear performance of Al/Ti spot welded joints was established via the neural network method.The results show that ultrasonic vibration can improve the performance of Al/Ti spot welded joints.The radial ultrasonic loading mode delivers a slightly better improvement,with the average tensile-shear performance increased by 7.54%,compared with 6.26%for the axial loading mode.Furthermore,the neural network prediction model based on the L-M algorithm for ultrasonic-assisted Al/Ti spot welded joints achieves an average relative error of 3.07%between predicted and experimental values for joint tensile-shear properties,and 4.19%for the model of maximum absorbed energy of joints.

关键词

异质连接/超声辅助/组织性能/神经网络

Key words

dissimilar joining/ultrasonic assistance/microstructure and mechanical properties/neural network

分类

矿业与冶金

引用本文复制引用

何默涵,魏连峰,郑勇,杨灿湘,商乔,陈显昊,王元勋..超声辅助铝/钛电阻点焊接头性能调控及预测[J].重型机械,2026,(5):31-36,6.

基金项目

国家自然科学基金(U24B200228) (U24B200228)

重型机械

1001-196X

访问量0
|
下载量0
段落导航相关论文