| 注册
首页|期刊导航|重型机械|精密箔材张力-板形协同补偿控制研究

精密箔材张力-板形协同补偿控制研究

刘畅 张国华 赵学智 侯翔宇 程攀伦 马彬锋 黎思怡

重型机械Issue(5):48-56,9.
✕
重型机械Issue(5):48-56,9.

精密箔材张力-板形协同补偿控制研究

Research on tension-flatness coordinated compensation control for precision foil

刘畅 1张国华 1赵学智 1侯翔宇 1程攀伦 2马彬锋 2黎思怡3

作者信息

  • 1. 陕西创源钛材装备创新中心有限公司,陕西 西安 710018
  • 2. 中国重型机械研究院股份公司,陕西 西安 710018
  • 3. 西安重型技术有限责任公司,陕西 西安 710018
  • 折叠

摘要

Abstract

To address the transmission of tension fluctuations to the flatness output through the entry boundary of the leveling section during continuous leveling of precision foil,a precision foil leveling line with a design speed of 100 m/min and a thickness range of 0.02-0.25 mm was investigated.The coupling relationship between tension state and flatness regulation was analyzed based on unit tension,roll-speed difference,flatness I-value,and bending strain.An equivalent dynamic model relating S-roll speed correction,tension variation,leveling actuator input,and flatness(I)-value was established.On this basis,the S-roll speed reference was corrected according to the tension feedback from the tension-measuring roll,and a tension-state compensation term was introduced into the flatness feedback loop to develop a tension-flatness coordinated compensation control method.MATLAB simulation results showed that the maximum tension deviation was reduced from 12.682 N to9.483 N by tension feedback compensation,corresponding to a reduction of 25.23%.Compared with independent flatness feedback control,the coordinated control reduced the peak flatness disturbance from 0.417 I-unit to 0.248 I-unit,corresponding to a reduction of 40.66%.Field statistics based on 260 samples showed that the overall leveling qualification rate of precision foil with a thickness of 0.02-0.25 mm reached 98.1%.The results indicate that the established model can characterize the dynamic effect of tension disturbances on flatness output,and that the proposed coordinated compensation method can improve the dynamic responses of both tension and flatness,providing a reference for control parameter design and engineering commissioning of precision foil leveling lines.

关键词

精密箔材/平整机组/张力-板形耦合/协同补偿/张力反馈

Key words

precision foil/leveling line/tension-flatness coupling/coordinated compensation/tension feed-back

分类

矿业与冶金

引用本文复制引用

刘畅,张国华,赵学智,侯翔宇,程攀伦,马彬锋,黎思怡..精密箔材张力-板形协同补偿控制研究[J].重型机械,2026,(5):48-56,9.

重型机械

1001-196X

访问量0
|
下载量0
段落导航相关论文