| 注册
首页|期刊导航|重型机械|重载齿轮点蚀对啮合瞬态应力应变的影响

重载齿轮点蚀对啮合瞬态应力应变的影响

王成烨

重型机械Issue(5):67-74,8.
✕
重型机械Issue(5):67-74,8.

重载齿轮点蚀对啮合瞬态应力应变的影响

Transient analysis of meshing stress and strain evolution under different pitting degrees for heavy-duty equipment gears

王成烨1

作者信息

  • 1. 佳木斯大学 机械工程学院,黑龙江 佳木斯 154007
  • 折叠

摘要

Abstract

Aiming at the tooth flank pitting fault of large-scale gears in heavy-duty equipment,three finite element models(pitting-free,light pitting,and severe pitting)were established based on the transient finite element method.Comparative simulations with a single variable were carried out to quantitatively analyze the influence of pitting damage on stress,strain,and deformation characteristics during the whole gear meshing process.The results show that pitting pits destroy the continuous bearing profile of the tooth surface,leading to load redistribution and inducing significant stress and strain concentration at the pit edges.With the aggravation of damage,the global average total deformation,equivalent elastic strain,and equivalent stress of the gear increase step by step,and the mechanical deterioration of severe pitting is the most prominent.It is found that there is a local stress relief effect in the pitting pit at the initial meshing stage,making the instantaneous peak value occasionally lower than that of the healthy gear.However,the average mechanical indicators over the full cycle are still significantly higher,indicating that pitting will greatly increase the risk of tooth surface contact fatigue failure.

关键词

点蚀/应力应变/变形特性

Key words

pitting/stress and strain/deformation characteristics

分类

机械制造

引用本文复制引用

王成烨..重载齿轮点蚀对啮合瞬态应力应变的影响[J].重型机械,2026,(5):67-74,8.

重型机械

1001-196X

访问量0
|
下载量0
段落导航相关论文