| 注册
首页|期刊导航|电子元件与材料|CuO对(Ni1/3Nb2/3)0.7Ti0.3O2微波陶瓷低温烧结性能的影响

CuO对(Ni1/3Nb2/3)0.7Ti0.3O2微波陶瓷低温烧结性能的影响

张岭 姜胜林 郭立 黄浩 张光祖

电子元件与材料2011,Vol.30Issue(1):1-3,3.
电子元件与材料2011,Vol.30Issue(1):1-3,3.

CuO对(Ni1/3Nb2/3)0.7Ti0.3O2微波陶瓷低温烧结性能的影响

Effects of CuO on the low sintering behavior of (Ni1/3Nb2/3)o.7Tio.3O2 microwave ceramic

张岭 1姜胜林 1郭立 1黄浩 2张光祖1

作者信息

  • 1. 华中科技大学,电子系,湖北,武汉,430074
  • 2. 广东风华邦科电子有限公司,广东,肇庆,526000
  • 折叠

摘要

Abstract

The (Ni1/3aNb2╱3)0. 7Ti0.302 microwave ceramics were prepared by the conventional solid state reaction process.The low singtering behavior, microstructure, phase composition and microwave dielectric properties of prepared ceramics were studied. The results show that a small amount of CuO addition to (Ni1/3Nb2╱3)0.7Ti0.3O2 ceramics decreases the sintering temperature effectively. Also, the τ∫ is optimized by CuO doping. Especially, the 1.0%(mass fraction) CuO-doped (Ni1/3Nb2╱3)0.7Ti0.3O2 ceramics are sintered at 950 ℃ with good microwave dielectric properties ofεr = 67.65, Q ·∫= 3 708GHz, and r∫= 14.3× 10-6/℃.

关键词

(Ni1/3Nb2/3)0.7Ti0.3O2/CuO掺杂/低温烧结

Key words

(Ni1/3Nb2╱3)0.7Ti0.302/ CuO doping/ low sintering

分类

动力与电气工程

引用本文复制引用

张岭,姜胜林,郭立,黄浩,张光祖..CuO对(Ni1/3Nb2/3)0.7Ti0.3O2微波陶瓷低温烧结性能的影响[J].电子元件与材料,2011,30(1):1-3,3.

基金项目

广东省教育部产学研结合资助项目(No.2008B090500170) (No.2008B090500170)

电子元件与材料

OA北大核心CSCDCSTPCD

1001-2028

访问量0
|
下载量0
段落导航相关论文