电子元件与材料2011，Vol.30Issue(5)：12-14,30,4.
原位生长钙长石/莫来石复合材料的制备
Preparation of the anorthite/mullite composites by the in-situ growth method
摘要
Abstract
Anorthite/mullite composites were prepared by the in-situ growth method using the main materials such as kaolin, aluminum hydroxide and calcium carbonate. Effects of the sintering temperature and anorthite/mullite mass ratio on the properties of the composites were studied. The results show that the highest flexural strength of the composites are 128.9-151.7 MPa, when the mass ratio of anorthite/mullite is 30:70 and the composites are sintered at 1 400-1 420 ℃. The in-situ growth prepared anorthite/mullite ceramic-glass composites exhibit better dielectric properties and higher flexural strength, which could be applied for the low temperature co-fired ceramic substrate materials.关键词
原位生长/钙长石/莫来石复合材料/抗折强度Key words
in-situ growth/ anorthite/mullite composites/ flexural strength分类
信息技术与安全科学引用本文复制引用
董伟霞,包启富,顾幸勇,胡克艳,江俊..原位生长钙长石/莫来石复合材料的制备[J].电子元件与材料,2011,30(5):12-14,30,4.基金项目
江西省教育厅科研资助项目(No.202021) （No.202021）
