电子元件与材料2011，Vol.30Issue(8)：12-15,4.
压电单晶悬臂梁的输出电压测试分析
Analysis and experiments on the output voltage of piezoelectric unimorph cantilever
摘要
Abstract
The piezoelectric unimorph cantilever was simulated through the finite element analysis software ANSYS and experiments on it were taken out. The effects of the substrate materials, the glue, the acceleration and frequency of the exciting force on the output voltage were analyzed. The results show that the output voltage is improved by the substrate with larger elastic module, and the substrate with non-conductive glue can produce higher voltage than that with conductive. In addition, the piezoelectric cantilever has fine frequency selectivity. The output voltage can reach 25.3 V when the frequency is 33 Hz. These results are beneficial to optimizing the structures of the devices and designing the ideal piezoelectric energy harvester.关键词
压电单晶悬臂梁/能量收集器/有限元仿真/开路电压Key words
piezoelectric unimorph cantilever/ energy harvester/ finite element simulation/ open-circuit voltage分类
信息技术与安全科学引用本文复制引用
王青萍,范跃农,王骐,姜胜林..压电单晶悬臂梁的输出电压测试分析[J].电子元件与材料,2011,30(8):12-15,4.基金项目
广东省教育部产学研结合资助项目(No.2010B090400447) （No.2010B090400447）
