| 注册
首页|期刊导航|电子元件与材料|保温时间对钙钡硼硅复相陶瓷性能的影响

保温时间对钙钡硼硅复相陶瓷性能的影响

张一源 周洪庆 邵辉 王杰

电子元件与材料2012,Vol.31Issue(3):1-3,3.
电子元件与材料2012,Vol.31Issue(3):1-3,3.

保温时间对钙钡硼硅复相陶瓷性能的影响

Effects of holding time on the properties of Ca-Ba-B-Si composite ceramics

张一源 1周洪庆 1邵辉 1王杰1

作者信息

  • 1. 南京工业大学材料科学与工程学院,江苏南京210009
  • 折叠

摘要

Abstract

Ca-Ba-B-Si glass/α-Al2O3 composite ceramics for low temperature co-fired ceramics (LTCC) substrate were prepared by sintering the mixture of Ca-Ba-B-Si glass and alumina. The effects of holding time on the microstructure, sintering properties and dielectric properties of the composite ceramics were investigated. The results show that the density, water absorption rate and permittivity of the composite ceramics increase first and then decrease with increasing holding time, while the dielectric loss decreases first and then increases. The composite ceramics prepared through sintering at 850 ℃ for 20 min show a better performance in comparison to other samples: a bulk density of 3.12 g ? Cm-3, a water absorption rate of 0.11%, a relative permittivityof7.88andadielectriclossof 1.0×10-3 at 10MHz.

关键词

钙钡硅硼系玻璃/复相陶瓷/保温时间/烧结性能/介电性能

Key words

Ca-Ba-B-Si glass/ composite ceramics/ holding time/ sintering properties/ dielectric properties

分类

信息技术与安全科学

引用本文复制引用

张一源,周洪庆,邵辉,王杰..保温时间对钙钡硼硅复相陶瓷性能的影响[J].电子元件与材料,2012,31(3):1-3,3.

基金项目

国家高技术研究发展计划资助项目(No.2007AA03Z0455) (No.2007AA03Z0455)

电子元件与材料

OA北大核心CSCDCSTPCD

1001-2028

访问量0
|
下载量0
段落导航相关论文