电子与封装Issue(3)：25-28,4.
基于PCB差分功分网络的设计
Design of Differential and Power Division Network Based on PCB
王胜源 1徐利兵 1彭艳1
作者信息
- 1. 中国西南电子设备研究所，成都610036
- 折叠
摘要
Abstract
The interconnection lines on RF PCB are commonly exhibited in the form of differential pair. When the transmitted signal is in high frequency, the structure needs to be researched by using mixed-mode scattering parameters(S-parameters). The paper begins with a review of the single-ended S-parameters for a generalized radio frequency network. Then, give the mixed mode S-parameter representation for a differential net. On the base of mixed mode S-parameter, design differential traces system printed on a PCB using CST, and construct and test the differential traces system. The results show that can swiftly and accurately design the radio frequency differential net by the mixed mode S-parameter.关键词
混合模式S参数/差分网络/传输线Key words
mixed mode S-parameter/differential network/transmission line分类
信息技术与安全科学引用本文复制引用
王胜源,徐利兵,彭艳..基于PCB差分功分网络的设计[J].电子与封装,2014,(3):25-28,4.
