电子元件与材料Issue(6)：41-43,3.DOI:10.14106/j.cnki.1001-2028.2015.06.011
气流式水平姿态传感器仿真的优化
Simulation optimization of airflow level posture sensor
摘要
Abstract
Optimization method of power replacing temperature was used to calculate the temperature distribution of the airflow level posture sensor in closed cavity. The temperature distribution of sensor in closed cavity was calculated at different inclination sensor status and under different environmental temperatures. The calculation and experimental results show that the temperature difference between two thermal resistance wires of airflow level posture sensor has good linear relationship with inclination, and the change rate is 2.618 3 K/(o). The effection of environmental temperature on the resistance difference about the sensors’ two thermal resistance wires also has a linear relationship. When the inclination is 24o, the change rate is –0.135 9 K/K. It has a good similarity with the experimental results.关键词
Fluent/气流式水平姿态传感器/倾角/环境温度/热源功率/温度差Key words
Fluent/airflow level posture sensor/inclination/environmental temperature/power of hot source/temperature difference分类
信息技术与安全科学引用本文复制引用
杨其锐,朴林华..气流式水平姿态传感器仿真的优化[J].电子元件与材料,2015,(6):41-43,3.基金项目
国家自然科学基金资助（No.60772012）；北京市自然科学基金重点项目&北京市教委科技计划重点项目资助（No. KZ201511232034）；新世纪优秀人才支持计划（NCET）资助；北京市重点实验室开放课题资助；北京市新世纪百千万人才工程培养资助项目；现代测控技术教育部重点实验室资助；北京信息科技大学大学生科技创新计划资助；北京信息科技大学研究生科技创新项目资助 （）
