郑州轻工业学院学报（自然科学版）Issue(2)：42-47,59,7.DOI:10.3969/j.issn.2095-476X.2015.02.010
制丝重点工序工艺参数对卷烟在制品色泽的影响
Effects of the key cutting process parameters on the tobacco product’s color and lustre
丁美宙 1苏东赢 1马宇平 1熊安言 1陈芝飞 1李全胜1
作者信息
- 1. 河南中烟工业有限责任公司 技术中心，河南 郑州 450000
- 折叠
摘要
Abstract
The effects of processing parameters of vacuum conditioning,tobacco leaf storage,cutting,and cut tobacco roller drying processing on tobacco leaf cut tobacco product’s color and lustre were studied using color difference instrument. The results showed that tobacco leaf brightness and color processed by two cycle vacuum conditioning more decreased than one,and tobacco leaf brightness and color also more decreased when conditioning temperature increased,time of keeping temperature and time of vacuum pum-ping longer in one cycle vacuum conditioning. Tobacco leaf brightness and color decreased more,color in-creases,color and lustre worse when temperature and humidity of storage environment increased and time of storage became longer. Cut tobacco brightness and color decreased more,color increased,color and lustre were worse when moisture content of tobacco and cutter mouthpiece pressure increased. The color had little influence on cut tobacco roller drying. According to the experiments results,the preferable process condi-tions were determined to keep excellent color and lustre of tobacco leaf and cut tobacco,which were one cycle vacuum conditioning,lighter processed strength(conditioning temperature was less than or equal to 55 ℃,time of keeping temperature and vacuum pumping were less than or equal to 50 s and 70 s);tem-perature and humidity of storage environment were 26 ℃ and 63% respectively,time of leaf storage was 2 ~ 8 h;moisture content of cutting was below 18. 5% ,and cutter mouthpiece pressure was below 0. 2 MPa,the hot air temperature was 105 ℃ and the temperature of the tube wall of roller was 125 ℃.关键词
真空回潮/贮叶/切丝/叶丝滚筒干燥/卷烟在制品/色泽Key words
vacuum conditioning/tobacco leaf storage/cutting/cut tobacco roller drying/tobacco product/color and lustre分类
轻工纺织引用本文复制引用
丁美宙,苏东赢,马宇平,熊安言,陈芝飞,李全胜..制丝重点工序工艺参数对卷烟在制品色泽的影响[J].郑州轻工业学院学报（自然科学版）,2015,(2):42-47,59,7.
