| 注册
首页|期刊导航|电子元件与材料|高介电(1-x)Ca0.7Nd0.2TiO3-xBa0.4Sr0.6TiO3陶瓷微波介电特性

高介电(1-x)Ca0.7Nd0.2TiO3-xBa0.4Sr0.6TiO3陶瓷微波介电特性

屈婧婧 魏星 赵耐丽 刘心宇 袁昌来 刘飞

电子元件与材料2016,Vol.35Issue(5):73-76,4.
电子元件与材料2016,Vol.35Issue(5):73-76,4.DOI:10.14106/j.cnki.1001-2028.2016.05.018

高介电(1-x)Ca0.7Nd0.2TiO3-xBa0.4Sr0.6TiO3陶瓷微波介电特性

Microwave dielectric properties of the high dielectric (1-x)Ca0.7Nd0.2TiO3-xBa0.4Sr0.6TiO3 ceramics

屈婧婧 1魏星 1赵耐丽 1刘心宇 2袁昌来 3刘飞2

作者信息

  • 1. 桂林航天工业学院 信息工程系,广西 桂林 541004
  • 2. 桂林电子科技大学 材料科学与工程学院,广西 桂林 541004
  • 3. 中南大学 材料科学与工程学院,湖南 长沙 410083
  • 折叠

摘要

Abstract

The (1–x)Ca0.7Nd0.2TiO3-xBa0.4Sr0.6TiO3(0.05≤x≤ 0.5) perovskite-like ceramics were prepared by the solid state reaction method. The sintering behavior, phases structure, microstructures and microwave dielectric properties of the ceramics were studied. The results indicate that theQ·fandτfvaluesof the samples increase monotonously with an increasing of (Ba0.4Sr0.6)2+ content while theεrincrease firstly and then decrease slightly. Also, the microwave dielectric properties of the ceramic (x= 0.2) sintered at 1 450℃ for 4h show a slight decrease inQ·f (5 900 GHz) andεr(151.3), and a much lowerτf (399.4×10–6/℃). Thus, the (1-x)Ca0.7Nd0.2TiO3-xBa0.4Sr0.6TiO3 ceramics are expected to replace conventional CaTiO3 system as a novel high-dielectric microwave material.

关键词

Ca0.7Nd0.2TiO3/Ba0.4Sr0.6TiO3/固相法/微结构/钙钛矿/微波介电性能

Key words

Ca0.7Nd0.2TiO3/Ba0.4Sr0.6TiO3/solid state reaction method/microstructures/perovskite/microwave dielectric properties

分类

信息技术与安全科学

引用本文复制引用

屈婧婧,魏星,赵耐丽,刘心宇,袁昌来,刘飞..高介电(1-x)Ca0.7Nd0.2TiO3-xBa0.4Sr0.6TiO3陶瓷微波介电特性[J].电子元件与材料,2016,35(5):73-76,4.

基金项目

广西高校科学技术研究项目资助(No. YB2014438);国家自然科学基金资助(No.11464006);广西自然科学基金资助(No.2014GXNSFBA118286);广西区教育厅高校科研项目资助 ()

电子元件与材料

OACSCDCSTPCD

1001-2028

访问量0
|
下载量0
段落导航相关论文