轻工学报2016，Vol.31Issue(4)：76-81,87,7.DOI:10.3969/j.issn.2096-1553.2016.4.011
薄板烘丝工艺参数对卷烟焦油释放量的影响
The influence of bake thin wire process parameter on tobacco tar delivery
罗军 1赵科文 1王强春 1刘舒畅 2李皓 3侯鹏娟 3张峻松3
作者信息
- 1. 贵州中烟工业有限责任公司 毕节卷烟厂，贵州 毕节 551700
- 2. 贵州中烟工业有限责任公司 技术中心，贵州 贵阳 550009
- 3. 郑州轻工业学院 食品与生物工程学院，河南 郑州 450001
- 折叠
摘要
Abstract
By designing different single-factor test,the influence of five process parameters of cylinder wall tem-perature,temperature of hot air,opening of hot air valve,moisture discharge valve,and revolving-speed of casing cylinder on the cigarette tar delivery were investigated.Through the establishment of a uniform design quadratic regression model of drying leaves set of samples and the corresponding parameters between tar deliv-ery,according to the theoretical model,optimal bake thin wire process parameters of cut tobacco leave samples were obtained:the cylinder wall temperature was 1 35 ℃,air temperature was 1 30 ℃,opening of hot air valve was 1 00%,moisture discharge valve was 50%,revolving-speed of casing cylinder was 8 r/min.关键词
薄板烘丝工艺参数/焦油释放量/均匀试验/二次回归Key words
bake thin wire process parameter/tar delivery/uniform experiment/quadratic regression分类
轻工纺织引用本文复制引用
罗军,赵科文,王强春,刘舒畅,李皓,侯鹏娟,张峻松..薄板烘丝工艺参数对卷烟焦油释放量的影响[J].轻工学报,2016,31(4):76-81,87,7.
