现代电子技术2024，Vol.47Issue(9)：29-34,6.DOI:10.16652/j.issn.1004-373x.2024.09.006
船用无线电标校信标机程控频点切换的设计
Design of program controlled frequency point switching for marine radio calibration beacon
何谦 1燕楠 1燕帅1
作者信息
- 1. 中国卫星海上测控部,江苏 江阴 214431
- 折叠
摘要
Abstract
The marine radio calibration beacon refers to a radio frequency signal generator that can provide stable tracking signals for shipborne unified measurement and control equipment.It is generally installed inside sounding balloons or suspended at the bottom of drones.After flying to a certain height and distance,the shipborne unified measurement and control equipment conducts tracking tests on the beacon signal.The present marine radio beacons can only operate at one frequency point in the air.If multiple operating frequency points need to be calibrated,the multiple radio beacons need to be released repeatedly.Therefore,a peripheral frequency conversion control circuit for the calibration beacon has been designed.By connecting this circuit to the calibration beacon,releasing one beacon for multi frequency calibration can be fulfilled.In the frequency conversion circuit,a low power SCM STC89C52RC is used as the basic control unit,which achieves the function of sending multiple preset working frequency point information to the beacon in a predetermined frame format at a fixed time by combining a DC-DC voltage reduction module and a level conversion module.After more than ten maritime and aerospace measurement tests,the results show that the program controlled frequency conversion control circuit can operate stably and has high control accuracy,and it can save calibration time and budget.关键词
航天测量船/标校/信标机/程控/变频电路/频点切换/STC89C52RCKey words
space TT&C ship/calibration/beacon/program control/conversion circuit/frequency point switching/STC89C52RC分类
电子信息工程引用本文复制引用
何谦,燕楠,燕帅..船用无线电标校信标机程控频点切换的设计[J].现代电子技术,2024,47(9):29-34,6.
