| 注册
首页|期刊导航|流体机械|热边界阀门微小内漏时温度场计算方法研究

热边界阀门微小内漏时温度场计算方法研究

李元姣 苗碧琪 何巍 蒋庆磊 杨垦

流体机械2024,Vol.52Issue(4):36-41,6.
流体机械2024,Vol.52Issue(4):36-41,6.DOI:10.3969/j.issn.1005-0329.2024.04.006

热边界阀门微小内漏时温度场计算方法研究

Study on calculation method of temperature field in case of slight internal leakage of thermal boundary valve

李元姣 1苗碧琪 2何巍 2蒋庆磊 2杨垦2

作者信息

  • 1. 海军工程大学 动力工程学院,武汉 430033||中核武汉核电运行技术股份有限公司,武汉 430223
  • 2. 中核武汉核电运行技术股份有限公司,武汉 430223
  • 折叠

摘要

Abstract

In order to study the distribution of temperature field on outer wall of the pipe in case of internal leakage of the valve,valve models with four kinds of defects were artificially designed.Based on the flow,evaporation and condensation and heat transfer models in FLUENT software,valve fluid-heat-solid coupling simulation was carried out,and the distribution law of temperature field with internal leakage was obtained:there is thermal stratification axial and circumferential direction in the distribution of temperature field;With the increase of internal leakage,the downstream temperature field of the valve increases as a whole.Circumferential thermal stratification tends to be flat at 2 times pipe diameter,which can be used as a monitoring point for internal leakage in engineering.The experimental data of temperature field in case of internal leakage and numerical simulation data were compared,and the deviation of temperature field falls within the allowable range for engineering,which verifies that the calculation method can be used for on-line monitoring and detection of thermal boundary valves in engineering practice.

关键词

边界阀门/内泄漏/热-流-固耦合/数值模拟

Key words

boundary valve/internal leakage/heat-fluid-solid coupling/numerical simulation

分类

机械制造

引用本文复制引用

李元姣,苗碧琪,何巍,蒋庆磊,杨垦..热边界阀门微小内漏时温度场计算方法研究[J].流体机械,2024,52(4):36-41,6.

基金项目

国家发改委攻关项目(20200389) (20200389)

流体机械

OA北大核心CSTPCD

1005-0329

访问量0
|
下载量0
段落导航相关论文