机电工程技术2024，Vol.53Issue(5)：229-232,261,5.DOI:10.3969/j.issn.1009-9492.2024.05.051
基于西门子PLC与WINCC的轮毂打磨系统设计
Design of Wheel Grinding System Based on Siemens PLC and WINCC
摘要
Abstract
With the rapid development of intelligent manufacturing and the rapid development of the automotive industry,in order to meet the production needs of automotive wheel hub parts,this article combines traditional polishing processes to improve the efficiency of wheel hub parts polishing,and designs a wheel hub polishing system based on Siemens PLC and WINCC.In hardware design,Siemens S7-1200 PLC is adopted as the main control system,ABB industrial robots as the execution device,and Omron industrial cameras as the visual inspection device.In software design,PLC main control program,storage block program,polishing block program,ABB industrial robot operation program,and visual program are design.The system uses Siemens WinCC software as the production status monitoring system,responsible for real-time monitoring of the entire process of parts polishing.After completing the debugging of each subsystem,practical application testing of the entire system is carried out.The application test results verifies that the automated wheel hub polishing system operates well,operates stably,has high completion rate of wheel hub parts,and has broad application prospects.关键词
轮毂/打磨/S7-1200 PLC/WINCC/工业机器人/智能制造Key words
wheel/grinding/S7-1200 PLC/WINCC/industrial robot/intelligent manufacturing分类
交通工程引用本文复制引用
张俊,王瀚彬,刘天宋,张任天..基于西门子PLC与WINCC的轮毂打磨系统设计[J].机电工程技术,2024,53(5):229-232,261,5.基金项目
江苏高校"青蓝工程"资助项目 （）
