包装与食品机械2025，Vol.43Issue(3)：105-112,8.DOI:10.3969/j.issn.1005-1295.2025.03.012
瓦楞纸箱智能柔性贴标设备的设计与试验
Design and test of intelligent flexible labeling equipment for corrugated boxes
朱逸磊 1袁浩 1王志 1方晓波 2符平彪 2王振意1
作者信息
- 1. 江苏大学 机械工程学院,江苏 镇江 212013
- 2. 江苏瑞克健康科技股份有限公司,江苏 镇江 212200
- 折叠
摘要
Abstract
To address the challenges of cumbersome adjustments and low efficiency in traditional corrugated carton labeling equipment during specification switching,an intelligent flexible labeling device based on visual technology was designed.Combining the intelligent flexible labeling requirements of corrugated cartons,the overall structure and operational principles of the device were elaborated.Through analysis of the labeling process,key factors affecting labeling accuracy were identified.Optimal parameter settings were determined via single-factor experiments,and mathematical relationships between label positioning and dispensing delay time were established through multiple dispensing tests.Prototype testing was conducted across 20 different labeling requirements.Results revealed that the optimal parameters were:upper labeling mechanism speed of 1,500 r/min,peeling height of 6 mm,peeling angle of 25°;lower labeling mechanism speed of 1 400 r/min,peeling height of 2 mm,peeling angle of 25°.The success rate of primary parameter adjustment reached 85%within 35～40 s,while secondary adjustments achieved 100%success with a total time of 97～101 s.It was significantly lower than the manual adjustment time of 15～30 mins.Final labeling positional deviation was controlled within 5 mm,with an operational efficiency of 30～90 pieces/min.This study provides insights for the intelligent and flexible design of packaging equipment.关键词
贴标设备/视觉识别技术/上位机技术/调控效率Key words
labeling equipment/visual recognition technology/host computer technology/adjustment efficiency分类
轻工纺织引用本文复制引用
朱逸磊,袁浩,王志,方晓波,符平彪,王振意..瓦楞纸箱智能柔性贴标设备的设计与试验[J].包装与食品机械,2025,43(3):105-112,8.
