包装与食品机械2025，Vol.43Issue(4)：32-38,7.DOI:10.3969/j.issn.1005-1295.2025.04.004
铝箔滚切机设计与优化
Design and optimization of a rotary aluminum foil cutting machine
张千 1王庆久 1邱宇 1钟飞 2许子威2
作者信息
- 1. 湖北中烟工业有限责任公司,武汉 430040
- 2. 湖北工业大学 机械工程学院,武汉 430068
- 折叠
摘要
Abstract
To address the issue of short tool life caused by excessive cutting force in traditional aluminum foil cutting equipment,a rotary aluminum foil cutting machine was designed.Structural design and parameter optimization of the rotary cutter were conducted to reduce cutting force and extend tool service life.Based on the contact mechanics relationship between the tool and aluminum foil material,the influencing factors of cutting force were simulated and analyzed using the finite element software LS DYNA and response surface methodology RSM.The interaction of three factors including blade angle,blade thickness,and rotary cutter speed on cutting force was investigated,and a multivariate regression prediction model with cutting force as the response variable was established.Results showed that the order of influence of the three factors on cutting force was blade angle greater than rotary cutter speed greater than blade thickness.With the goal of minimizing cutting force,the optimal parameter combination was determined as blade angle 15 degrees,blade thickness 1.5 mm,and rotary cutter speed 70 r/min.Experimental validation under these optimized conditions yielded an average cutting force of 259.10 N,with a mean relative error of 5.73 percent compared to the predicted value.This study provides a theoretical basis for improving the processing performance of aluminum foil cutting equipment and extending tool service life.关键词
铝箔/滚切机/滚刀/滚切仿真/函数模型Key words
aluminum foil/rotary cutting machine/rotary cutter/rotary cutting simulation/predictive function model分类
轻工纺织引用本文复制引用
张千,王庆久,邱宇,钟飞,许子威..铝箔滚切机设计与优化[J].包装与食品机械,2025,43(4):32-38,7.
