包装与食品机械2026，Vol.44Issue(1)：60-67,8.DOI:10.3969/j.issn.1005-1295.2026.01.007
PROTOS卷接机组排直鼓轮的吸附性能优化设计
Optimization design of the adsorption performance for the PROTOS aligning drum based on response surface methodology
摘要
Abstract
To address the frequent falling issue of triacetin-activated carbon filter segments in PROTOS cigarette making and tipping units caused by inadequate adsorption,Fluent software was employed to perform numerical simulation of the internal flow field within the aligning drum.Combined with the Box-Behnken response surface methodology,the influence of the positioning block opening height,groove pore radius,and pore inclination angle on adsorption performance was investigated.A response surface prediction model was constructed to achieve optimized design of the aligning drum's structure.The results showed that the aligning drum achieved optimal adsorption performance with a positioning block opening height of 4 mm,a pore radius of 2 mm,and a pore inclination angle of 0°.After optimization,the fluctuation range of the static pressure at the fluid outlet of the aligning drum was reduced by 76.26%,and the minimum static pressure value decreased by 17.18%,indicating significantly improved overall adsorption stability.The daily occurrence of filter segment falling per unit decreased from 14.5 times to 4.0 times,representing a reduction of 72.4%.This research provides a reliable technical approach for enhancing the performance of aligning drums in cigarette making and tipping equipment.关键词
PROTOS卷接机组/排直鼓轮/三元活性炭滤嘴段/定位块/响应面法Key words
PROTOS cigarette making and tipping unit/aligning drum/triacetin-activated carbon filter segment/positioning block/response surface methodology分类
轻工纺织引用本文复制引用
王己锋,邱勇杰,张小杭,张志彬,李光杰,魏慧龙..PROTOS卷接机组排直鼓轮的吸附性能优化设计[J].包装与食品机械,2026,44(1):60-67,8.基金项目
福建中烟工业有限责任公司科技项目(FJZYKJJH2023ZD031) （FJZYKJJH2023ZD031）
