| 注册
首页|期刊导航|电子与封装|大尺寸超薄碳化硅晶圆制备技术研究及其先进封装应用

大尺寸超薄碳化硅晶圆制备技术研究及其先进封装应用

喻志奎 朱一新 万青

电子与封装2026,Vol.26Issue(9):84-88,5.
✕
电子与封装2026,Vol.26Issue(9):84-88,5.DOI:10.16257/j.cnki.1681-1070.2026.0157

大尺寸超薄碳化硅晶圆制备技术研究及其先进封装应用

Fabrication Technology of Large-Size Ultra-Thin Silicon Carbide Wafers and Applications in Advanced Packaging

喻志奎 1朱一新 1万青1

作者信息

  • 1. 甬江实验室,浙江宁波 315202
  • 折叠

摘要

Abstract

With rapid advancements in fields such as AI chips and third-generation semiconductors,silicon carbide(SiC)is evolving toward larger sizes and reduced thickness.However,SiC is characterized by high Mohs hardness,high brittleness,sensitivity to grinding-induced damage,and difficulty in controlling thickness uniformity over large-size wafers;consequently,warpage,cracks and wafer breakage are readily induced by conventional thinning.To address these problems,a large-size ultra-thin SiC wafer fabrication technology based on room-temperature temporary bonding and precision thinning is proposed.The proposed technique is compatible with 6-inch and 8-inch SiC wafers,and thickness-controllable preparation in the 25-150 μm range is validated through experiments on 8-inch SiC wafers,with a total thickness variation(TTV)of ≤ 3.0 μm and a surface roughness(Ra)of ≤ 2.0 nm.It is shown by the test results that the fabricated 8-inch ultra-thin SiC wafer is characterized by a thickness of 29.5-31.6 μum,a TTV of 2.1 μm and an Ra of 1.61 nm,verifying the feasibility of the proposed technology for large-size,ultra-thin and high-flatness fabrication.

关键词

大尺寸超薄SiC/室温临时键合/精密减薄/先进封装/散热中介层

Key words

large-size ultra-thin SiC/room-temperature temporary bonding/precision thinning/advanced packaging/thermal interposer

分类

信息技术与安全科学

引用本文复制引用

喻志奎,朱一新,万青..大尺寸超薄碳化硅晶圆制备技术研究及其先进封装应用[J].电子与封装,2026,26(9):84-88,5.

基金项目

浙江省重点研发计划(2024SSYS0042) (2024SSYS0042)

浙江省引进和培育领军型创新及创业团队基金(2023R01011) (2023R01011)

电子与封装

1681-1070

访问量0
|
下载量0
段落导航相关论文