沈阳农业大学学报2026,Vol.57Issue(5):71-82,12.DOI:10.3969/j.issn.1000-1700.2026.05.007
水稻育秧流水线喷淋装置设计与试验
Design and Experiment of Spraying Device for Rice Seedling Nursery Assembly Line
摘要
Abstract
[Objective]In order to solve the problems of poor spray uniformity and low stability of the spraying device of high-speed rice industrial seedling raising assembly line,which led to the waste of chemicals and water,a spraying device was designed.[Methods]Through the analysis of the spraying process,the key parts and working parameters were determined;using Fluent fluid simulation,several different spray pipeline structures were studied.The single-factor and three-factor three-level response surface tests of the sprinkler pedestal were carried out using the angle between the sprinkler holes and the horizontal plane,the aperture diameter of the sprinkler holes,and the height of the sprinkler pipe as the test factors,and the Christensen's coefficient of uniformity,Cu,and the coefficient of variation,Cv,as the evaluation indexes.[Results]The results showed that the order of the influence of each factor on the spray uniformity and stability is ranked as the size of the spray pipe aperture,the size of the spray hole and the horizontal angle size and the height of the spray pipe;through the extreme value analysis and ANOVA,the optimal parameter combination is obtained as the size of the angle between the spray hole and the level of 60°,the size of the spray hole of 1.27 mm,and the height of the spray pipe of 29.8 mm,then the uniformity coefficient of the spray is 95.189%,and the coefficient of variation 5.988%.[Conclusion]The results of the study can provide a reference for the optimal design of the spraying device in the rice factory seedling production line.关键词
水稻/育秧流水线/喷淋装置/性能试验Key words
rice/seedling raising assembly line/spraying device/performance test分类
农业科技引用本文复制引用
谢方平,李家杰,夏家成,刘大为,龚明..水稻育秧流水线喷淋装置设计与试验[J].沈阳农业大学学报,2026,57(5):71-82,12.基金项目
湖南省重点研发计划项目(2024JK2032) (2024JK2032)