Semi-hydro-equivalent design and performance extrapolation between 100 kJ-scale and NIF-scale indirect drive implosionOA

Extrapolation of implosion performance between different laser energy scales is investigated for indirect drive through a semi-hydroequivalent design.Since radiation transport is non-hydro-equivalent,the peak radiation temperature of the hohlraum and the ablation velocity of the capsule ablator are not scale-invariant when the sizes of the hohlraum and the capsule are scale-varied.A semi-hydro-equivalent design method that keeps the implosion velocity V_(i),adiabat α_(F),and P_(L)/R_(hc)^(2) (where P_(L) is the laser power and R_(hc) is the hohlraum and capsule scale length)scale-invariant,is proposed to create hydrodynamically similar implosions.The semi-hydro-equivalent design and the scaled implosion performance are investigated for the 100 kJ Laser Facility(100 kJ-scale)and the National Ignition Facility(NIF-scale)with about 2 MJ laser energy.It is found that the one-dimensional implosion performance is approximately hydro-equivalent when V_(i) and α_(F) are kept the same.Owing to the non-hydro-equivalent radiation transport,the yield-over-clean without α-particle heating(YOC_(noα))is slightly lower at 100 kJ-scale than at NIF-scale for the same scaled radiation asymmetry or the same initial perturbation of the hydrodynamic instability.The overall scaled two-dimensional implosion performance is slightly lower at 100 kJ-scale.The general Lawson criterion factor scales asχ_(noα) ^(2D)∼S^(1.06±0.04)(where S is the scale-variation factor)for the semi-hydro-equivalent implosion design with a moderate YOC_(noα).Our study indicates that χ_(noα)≈0.379 is the minimum requirement for the 100 kJ-scale implosion to demonstrate the ability to achieve marginal ignition at NIF-scale.