宽带滤波器传输线法去嵌的研究OA北大核心CSTPCD
Research on the de-embedding of broadband filter transmission line method
为准确获取谐振器材料参数,采用开路短路法、集总参数法、传输线法三种方法分别对谐振器进行去嵌,并分析去嵌对滤波器产生的影响.其中传输线法去嵌无需流片,仿真即可得出谐振器测试结构的寄生参数.采用传输线法对串联、并联谐振去嵌,并运用去嵌后的谐振器材料参数搭建滤波器,滤波器采用九阶π型电路拓扑结构,其带宽为160 MHz,阻带抑制为-25 dB.证实谐振器的测试结构对宽带声表面波滤波器带宽、阻带和零点造成影响,使得去嵌后的滤波器左侧零点向低频偏移,低频抑…查看全部>>
Various methods were used to de-embed the resonator and analyze the effect of de-embedding on the filter to obtain accurate material parameters of the resonator.Three methods were used to de-embed the resonator,namely,the open-circuit short-circuit method,the lumped-parameter method,and the transmission line method.Among them,the transmission line method does not require tapeout,and parasitic parameters of the resonator can be derived from simulation.The ser…查看全部>>
周艺蒙;帅垚;胡月;吴传贵;张万里
重庆邮电大学光电工程学院,重庆 400065电子科技大学电子薄膜与集成器件国家重点实验室,四川成都 610054||电子科技大学重庆微电子产业技术研究院,重庆 401332重庆邮电大学光电工程学院,重庆 400065电子科技大学电子薄膜与集成器件国家重点实验室,四川成都 610054||电子科技大学重庆微电子产业技术研究院,重庆 401332电子科技大学电子薄膜与集成器件国家重点实验室,四川成都 610054||电子科技大学重庆微电子产业技术研究院,重庆 401332
电子信息工程
去嵌开路短路法集总参数法传输线法宽带滤波器π型电路拓扑结构
de-embeddingopen-circuit short-circuit methodlumped parameter methodtransmission line methodbroadband SAW filterπ-type circuit topology
《电子元件与材料》 2024 (7)
866-871,6
四川省科技计划基金资助项目(2020YF0002)
评论